装修攻略|门窗装修具体步骤
The concrete steps of the decoration and the decoration of the doors and windows
门窗装修看起来毫无艺术感，但实际里面的学问是挺深的，稍不注意就会为以后开窗或开门带来麻烦，影响入住以后的居家生活，门窗也属于一个家的外部形象，一定要维护好呀！
Door and window decoration looks no artistic sense, but the actual knowledge is very deep, a little attention will bring trouble for the future window or open door, affect the home life after occupancy, windows and doors also belong to the external image of a home, must maintain good!
门窗装修，如果施工人员不细心，容易使门窗装修得扭曲，日后就会变形产生一系列的问题，那么怎么避免这些问题的产生，以及怎么去监督施工人员把门窗装修做好，这需要懂的一定的常识，接下来就为大家分享一下门窗装修的经验。
Door and window decoration, if the construction staff is not careful, easy to make the door and www.oudiya.net www.dingxinkeji.net www.futeqizhong.com www.baoyunzhiban.com www.xinxingjiancai.com.cn www.jinhuaronglian.comwindow decoration twisted, the later will change a series of problems, then how to avoid these problems, and how to supervise the builders to decorate the doors and windows, this needs to understand certain common sense, and then share the doors and windows for everyone. Experience in repair.
第一、 最好先更换门窗
First, it is best to change the doors and windows first
因为拆窗过程会破坏室内外的墙体，最好先更换门窗再进行下一步的装修。建议大家门窗装修时应选用高品质品牌的门窗，因为门窗型材的品质将决定整个门窗的档次、密封性和抗老化性等问题。
Because the demolition of windows will destroy indoor and outdoor walls, it is best to first replace windows and doors for further renovation. It is suggested that the doors and windows of high quality brand should be selected when the doors and windows are decorated, because the quality of the door and window profiles will determine the grade, sealing and anti aging of the whole door and window.
第二、 选购精度和强度好的门窗
Second. Select and buy the doors and windows with good precision and strength
一定要去正规的建材市场，特别是有些低劣的塑料门窗，内衬钢质量低劣，甚至没有衬钢，其他的配件也很差。
We must go to the formal building materials market, especially some inferior plastic doors and windows, poor quality of lining steel, even without lining steel, and other accessories are also very poor.
第三、 门窗会变黄
Third. The doors and windows will turn yellow
有些塑料门窗的外观颜色过白或发灰，说明其材质内的稳定成分不够，日久易老化变黄。
The appearance of some plastic doors and windows is too white or grey, indicating that the stable ingredients in their materials are not enough, and they are easy to become old and yellow.
第四、 检查五金件是否灵活、顺畅
Fourth, check whether the hardware is flexible and smooth
推拉窗窗框下部应有铝滑轨，方便其更换，窗扇的密封毛条中间应有固定片，这是推拉窗密封性好坏的关键。
The aluminum sliding rail at the lower part of the window frame of the sliding window is convenient for replacement, and there should be a fixed piece in the middle of the sealing part of the window sash, which is the key to the sealing performance of the sliding window.
第五、 门窗安装
Fifth. Installation of doors and windows
窗框与墙体之间应有发泡胶进行填充，且窗框内外侧必须用硅铜胶或密封胶进行密封防止渗水。切记，安装完后，用户应揭掉保护膜，这样可以延长门窗的使用寿命。
Foam Sealants should be filled between window frames and walls, and inside and outside the window frames must be sealed with silicone rubber or sealant to prevent seepage. Remember, after installation, users should remove the protective film so that the service life of windows and doors can be prolonged.